Estimation of annual Energy Output from BCM Tidal Barrage and the Corresponding Marine Environmental Impact
Title: Estimation of annual Energy Output from BCM Tidal Barrage and the Corresponding Marine Environmental Impact
Journal: Journal of Ocean University of China, 15(2): 209–218.
Authors: YU H. -M., L. Wang, L. Kuang*, H. -Q. Yu, Y. -C. Sun, Y. –H. Qu, and X. Wu
Abstract: Based on the finite-volume coastal ocean model (FVCOM), a three-dimensional numerical model FVCOM was built to simulate the ocean dynamics in pre-dam and post-dam conditions in Bachimen (BCM). The domain decomposition method, which is effective in describing the conservation of volume and non-conservation of mechanical energy in the utilization of tidal energy, was employed to estimate the theoretical tidal energy resources and developable energy resources, and to analyze the hydrodynamic effect of the tidal power station. This innovative approach has the advantage of linking physical oceanography with engineering problems. The results indicate that the theoretical annual tidal energy resources is about 2×108 kWh under the influence of tidal power station; Optimized power installation is confirmed according to power generation curve from numerical analysis; the developable resources is about 38.2% of theoretical tidal energy resources with the employment of one-way electricity generation. The electricity generation time and power are 3479 hours and 2.55×104 KW, respectively. The power station has no effect on the tide pattern which is semi-diurnal tide in both two conditions, but the amplitudes of main constituents apparently decrease in the area near the dam, with the M2 decreasing the most, about 62.92 cm. The tidal prism shrinks to 2.28×107 m3, but can still meet the flow requirement for tidal power generation. The existence of station increases the flow rate along the waterway and enhances the residual current. There are two opposite vortexes formed on the east side beside the dam of the station, which leads to pollutants gathering.