Facility：Dynamic Light Scattering

Model:  WTATT DynaPro NanoStar

Note:

     1. All operators must receive training prior to using the equipmentand can only use it by themselves after being trained.

     2. Please read the operation documents carefully before use to have a full understanding of the basic structure, performance and operation procedure

     3. Turn off the power and the computer after use.

     4. Carefully clean the color plate and put the experimental supplies neatly.

     5. Cover the dust shield.

6. Please register and clean the machine and bench after operation.

Facility：Isothermal Titration Calorimetry

Model:  Malvern PEAQ-ITC

Note:

1. Please confirm the status of the instrument by water drop test before use.

2. Clean the sample with both water and  buffer solution before the experiment. Clean cell and syringe every two experiments.

3. Use the syringe needle tube carefully.

Facility：Differential Scanning Calorimeter

Model:  Malvern PEAQ-DSC

Note:

       1. Please preheat before use.

       2. No DTT.

Facility：Material Testing Machine

Model:  E42 503E

Note:

1. The maximum range of the sensor is 5N, and it is strictly prohibited to use beyond the range.

2. All operators must receive training prior to using the equipment

3. Before use, turn on the main power supply, air pump, machine power supply and software.

4. Turn off the software, machine, air pump, and main power in turn.

5. Please register and clean up the garbage around the machine after use.